Open the Routing dialog to define the routes to be used by the camera for connecting to different networks. Connections via the Ethernet interface can be used as well as ISDN data connections.
In general, the camera can only send network data using a connection previously configured in the Ethernet Interface and ISDN Data Connections (Dial-In Connection or Dial-Out Connections tabs) dialogs.
|Note:||Make sure that you create a route for every ISDN dial-out connection; otherwise the camera does not dial out.|
A network is defined by the network address and the network mask. For example, by factory default the camera is configured to an IP address within the network
10.0.0.0/255.0.0.0 (network address/network mask).
Networks are connected through gateways. This may be an ISDN router or a special computer within the network.
In order for each computer within the network to know if and how it can connect to computers in other networks, you need to configure routes. A route consists of the following information:
Select the connection to be used by default. In general, this is the connection to your Internet Service Provider or to the closest gateway.
When you select the Ethernet Interface connection, you need to enter the IP address of the Gateway. Valid gateway IP addresses need to be accessible within the camera's local network (as defined in the Ethernet Interface dialog).
|Note:||When you have activated the BOOTP/DHCP option in the Ethernet Interface dialog, the Default Route is always set to the Ethernet Interface with the Gateway IP Address being determined automatically.|
When you select an ISDN Dial-Out Connection, the camera accepts the DNS server's IP address proposed by the service provider.
Enter the routes to other networks.
|Note:||When you have selected an ISDN connection, you cannot access computers within this network using the symbolic DNS name but only via their IP address.|
|Inactive||Deactivates this route entry.|
|Remove||Removes this route from the configuration.|
For additional information on the topic, see the Routing - Example help topic.
Klicken Sie auf Setzen, um die Einstellungen zu aktivieren und bis zum nächsten Neustart der Kamera zu sichern.
Beenden Sie den Dialog durch Klick auf Schließen. Hierbei wird geprüft, ob Änderungen der Gesamtkonfiguration vorliegen. Ist dies der Fall, werden Sie gefragt, ob die Gesamtkonfiguration dauerhaft gesichert werden soll.
Zum Aktivieren dieser Einstellungen ist ein Neustart der Kamera erforderlich!